Tianrun TR-MG1002 is an unsaturated polyester resin (modified) with phthalic anhydride and standard diols as the main raw materials, which has been dissolved in styrene. It has medium viscosity and medium reactivity. End anchor, full anchor, cable special.
2. Technical specifications of liquid resin (25℃) :
Item
Unit
Test index
Test method
Appearance
---
Clear yellowish liquid
GB/T8237.6.1.1
Viscosity
CPa·s
0.35-0.65
GB/T 7193-2008
Acid number
mgKOH/g
≤25
GB/T 2895-2008
Gel time
Min（25℃）
3-6
GB/T 7193-2008
Stability
H（80℃）
≥24
GB/T 7193-2008
Note: Water bath at 25℃, 50g resin added 1g cobalt iso-octoate solution and 0.5g M-50.
3. Physical properties of the casting body (for reference only) :
Item
Unit
Test performance
Test method
Casting body
Tensile strength
MPa
≥50
GB/T2567-2008
Tensile modulus of elasticity
MPa
≥2600
GB/T2567-2008
Elongation at break
%
≥2.0
GB/T2567-2008
Flexural elastic modulus
MPa
≥3000
GB/T2567-2008
Thermal deformation temperature
℃
≥60
GB/T1634-2004
Note:
(1) The casting system sample is measured by adding filler; Curing system: promoter DMA 1.0%, curing agent 70%BPO 5%.
(2) Curing after casting: room temperature ×24 hours +60℃×3 hours +80℃×2 hours;
4. Note:
1. Stir well in the packaging bucket before use, or pour out all the resin in the packaging bucket and stir well before use.
2. The transportation shall comply with the transportation and loading provisions of chemical dangerous goods in Chapter 5 of the Regulations on the Safety Administration of Chemical Dangerous Goods of The State Council. The product should be stored in a cool place below 25℃, avoid fire, isolate heat source, and the shelf life below 25℃ is 3 months.
5. Product Safety Data (MSDS) :
Before using this product, be sure to read this product MSDS in detail.
language
Hotline
